Laser Rust Removal

Laser rust removal in Winnipeg, without the damage

Rust is more than an eyesight problem. On steel, iron, and alloy surfaces it is a structural problem that spreads, weakens components, and shortens equipment life. Arc Surface Solutions removes rust, scale, and corrosion across Winnipeg and Manitoba using a 300W pulsed fiber laser that vaporizes oxidation cleanly, without sandblasting, chemicals, or damage to the metal beneath.

Why Laser

Laser rust removal beats sandblasting

Sandblasting has been the default for decades, but it carries hidden costs that compound on every job:

It damages the substrate. Abrasive media blasts away rust and good metal alike, pitting surfaces, rounding sharp edges, and removing protective layers. On machined parts and precision components, that damage is permanent.
It creates hazardous waste. Silica dust and spent media require containment and disposal. Manitoba silica regulations are tightening, driving up compliance costs.
It shuts you down. Blasting generates dust clouds that contaminate nearby work, forcing you to isolate the area and clean up afterward.

Laser rust removal changes the equation. The laser beam targets the rust and leaves the underlying metal untouched. There is no media, no dust, no secondary waste, and no need to move the part to a blasting booth. We clean equipment in place, so your operation keeps running.

What We Clean

Surfaces we de-rust in place

Steel beams, plate, and structural steel — before welding, painting, or recoating
Machinery and production equipment — frames, housings, and components
Fleet vehicles and heavy equipment — truck frames, trailers, tractors, and attachments
Tanks, vessels, and piping — exterior rust before inspection or recoating
Hand tools, dies, molds, and tooling — precision parts where blasting would cause damage
Cast iron and alloy components — where abrasive media would remove material

If it is metal and it has rust, we can likely clean it in place. Send us photos and we will confirm.

Speed

How fast is laser rust removal?

Cleaning speed depends on the depth of the rust and the surface area:

Light rust & oxidation: 5 to 15 sq ft/hr

Heavy rust & scale: 1 to 5 sq ft/hr

We provide a realistic time estimate during quoting, based on photos or a site visit. No inflated numbers, no surprises.

Safety

Is it safe for my equipment?

Yes. Our 300W pulsed fiber laser is calibrated so that rust and oxidation absorb the laser energy while the metal beneath remains untouched. We assess every substrate before cleaning begins and adjust the laser settings to suit the material. Delicate surfaces, threads, and machined tolerances stay intact.

We follow ANSI Z136.1 laser safety standards on every job, with controlled laser areas, certified eyewear, barriers, and HEPA fume extraction for indoor work.

Why Arc

Why Winnipeg and Manitoba businesses choose Arc

Mobile and Self-Contained

We bring the laser and run on portable generator power. No transport, no facility requirements, no downtime.

No Chemicals, No Waste

No solvents, no abrasive media, no hazardous byproducts. Fully compliant with Canadian VOC and Manitoba silica regulations.

Selective Removal

Clean only what needs cleaning. Do not blast away good metal or protective coatings you want to keep.

Documented Results

We photograph before and after on every job, so you have clear proof of the work delivered.

FAQ

Laser rust removal questions, answered

Can laser cleaning remove heavy rust?+

Yes. Our 300W pulsed fiber laser removes heavy rust and scale at 1 to 5 square feet per hour. Deep corrosion is eliminated without pitting or damaging the underlying metal.

Does laser rust removal damage the metal?+

No. The laser is calibrated so rust absorbs the energy while the substrate remains untouched. This is a key advantage over sandblasting, which removes good metal along with the rust.

Can you clean rust off equipment without moving it?+

Yes. We are a mobile service. We bring the laser to your facility and clean equipment in place, so you avoid the cost and downtime of transporting parts to a blasting booth.

Do you service areas outside Winnipeg?+

Yes. We are based in Winnipeg and service the surrounding region, including Selkirk, Brandon, Portage la Prairie, Steinbach, Winkler, and other Manitoba communities. Travel within the city is included.